Morgana DigiFold 5000P Creaser Folder


Morgana DigiFold 5000P Creaser Folder


Now in stock at Glendale we have this Morgana DigiFold 5000P creaser folder. This DigiFold 5000P has been refurbished by a Morgana trained engineer and is in excellent condition, and running perfectly. 

The versatile DigiFold 5000P has several uses. 

• As an integrated creaser/folder performing both functions in a single pass 

• As a stand alone creaser when folding is not required. 

• As a perforator when creasing and folding are not required.

By combining the functions of creasing and folding in a single compact unit, Morgana has provided the printer with a highly productive, easy to use mobile finishing centre that is equally effective with digital output or with heavy crossgrained stocks printed by conventional means and laminated stocks. The DigiFold has successfully eradicated problems of being able to crease and fold, without marking, in one simple operation.

The DigiFold 5000P incorporates an automated creasing technology which builds on the proven creasing rule and matrix technology that has made the Morgana range a huge success in markets throughout the world. The DigiFold 5000P also uses the ‘flying knife’ folding system. This dispenses entirely with buckle plates and conventional knives, using instead an electronically controlled contoured flying knife around extra large diameter rollers and moving at the same speed as the material passing through the machine. Rather than the solid deflector used in most folders, the DigiFold 5000P uses a device in the form of a dynamic sheet deflector that only meets the leading edge of the sheet. This allows single or multiple folds to be performed without risk of scratching or marking.

The Morgana DigiFold 5000P can run at speed over 5,000 A4 sheets an hour. Speed increases when running smaller stocks and is achieved by creasing the sheet without stopping it yet maintaining an accuracy of +/- 0.1mm. This speed is maintained irrespective of the number creases being applied to the sheet. 9 sheets each with 9 creases can now be produced in less than 9 seconds! A maximum sheet size is 700mm x 358mm allows a wider range of jobs to be tackled. Perforation is standard on the DigiFold 5000P with up to 5 perforation wheels being used across the sheet. The feeder is powered by a powerful pump which allows greater airflow efficiency and therefore a higher pile to be loaded.


ModelDigiFold 5000P
Feeder systemSuction with bottom feeding
Max sheet size358 x 700mm
Min sheet size140 x 210mm
Speed5000 per hour A4
Max paper weight400gsm
Min paper weight100gsm
Electrical requirements220/240v 50Hz
Machine weight190kg
Dimensions(L)1980mm (W)685mm (H)1265mm